From 1 January 2027, MOM says, every forklift operator in Singapore must attend a forklift refresher course at least once every three years, and the employer must make sure of it. MOM's FAQ on forklift refresher training, last updated on 28 October 2026, puts it plainly: "From 1 January 2027, you must ensure your forklift operators attend refresher training on the operation of forklift once every 3 years." On our reading of MOM's circular, any driver whose last WSQ Operate Forklift Course or refresher was before 1 January 2024 needs a place on the enhanced 12-hour course before 1 January 2027, so book now: the year-end break leaves few working weeks.

At a glance

  • The deadline: MOM's circular MOM/OSHD/2025-01, dated 3 January 2025, gives all forklift operators until 1 January 2027 to comply.
  • The cycle: a refresher at least once every three years after the initial WSQ Operate Forklift Course, then once every three years after each refresher.
  • The course: the enhanced Forklift Operator Refresher Training course runs 12 hours: 4 hours of e-learning with an assessment, 4 hours of case-study group discussion and 4 hours of hands-on practice with an assessment.
  • Who is responsible: occupiers, employers and principals must make sure operators have completed the refresher before authorising them to drive a forklift.
  • Where to train: MOM's list of learning service providers, updated as at June 2026, names 16 providers certified for the refresher course.
  • Why: MOM's 6 November 2024 announcement says 1 in 4 workplace vehicular deaths in 2022 and 2023 involved forklifts, and MOM's inspections found that close to 8 in 10 forklift-related contraventions involved operators with no refresher in three years.

Who needs a forklift refresher course before 1 January 2027?

The rule covers every forklift operator: a storekeeper who moves pallets twice a week and an agency driver hired for the year-end peak count as much as a full-time driver.

Our reading of the circular: on 1 January 2027, each operator should have completed the WSQ Operate Forklift Course or a refresher within the previous three years. So:

  • Initial course or last refresher before 1 January 2024: due now, before 1 January 2027.
  • Completed during 2024: due on the third anniversary of that course, sometime in 2027.
  • Completed in 2025 or 2026: due three years after that date; put it in the calendar today so it does not slip.

MOM's FAQ document on the refresher, linked from the circular, may settle edge cases such as a last course in late December 2023, but we could not open it on 11 November 2026. If an operator sits close to a three-year mark, book the earlier date or ask MOM on the circular's contacts, 6438 5122 or wsh_training@wshc.sg.

Two related points. MOM's FAQ adds that operators of forklifts above 5 tonnes must also attend the Heavy Forklift Course, which the circular notes is neither WSQ-certified nor MOM-approved. And the "forklift licence" people search for is not an MOM licence: MOM's answer on lost licences (last updated 9 May 2024) says it does not issue forklift licences, and the WSQ certificate is the proof of competence for forklifts below 5 tonnes.

What changes on 1 January 2027?

Refresher training is not new advice. MOM's announcement notes that the WSH Council's guidelines on safe operation of forklifts, published in November 2012, already say operators should attend one every three years after their first course, and MOM's lost-licence answer says the Singapore Standard SS 573:2012 recommends the same. What changes is that MOM is turning the refresher from a recommendation into a requirement.

MOM's announcement places the new requirement under section 31(4) of the Workplace Safety and Health Act. The circular says MOM "intends to amend the workplace safety and health laws in due course" to make it mandatory from 1 January 2027. Singapore Statutes Online refused our requests on 11 and 20 November 2026, so we could not see whether that amendment has been published, but MOM's FAQ already says "must", so plan as if it applies.

The course has changed too. The circular says the enhanced course replaces the refresher training providers used to run; MOM's announcement lists WSH law and SS 573, load charts, stability, pre-use and post-use checks and lessons from past accidents. When you book, confirm it is the Forklift Operator Refresher Training Course on MOM's certified list, not an older or shorter session.

A worked example: sorting five operators by due date (illustrative)

The firm and people are fictional; the dates follow the circular's three-year rule as we read it. A small distribution company in a western industrial estate has five people who drive its two small forklifts and one 7-tonne forklift.

  1. Kumar took the WSQ Operate Forklift Course in March 2019 and has had no refresher. He is already past the three years the 2012 guidelines recommend and must complete the enhanced course before 1 January 2027. Book first.
  2. Nurul last attended a refresher in February 2023. Three years ran out in February 2026, so she also needs a place before 1 January 2027.
  3. Jason finished a refresher on 15 December 2023. His three years end on 15 December 2026, inside the period the circular gives all operators until 1 January 2027, so on our reading he too must be done by 1 January; booking him for early December also keeps him within his own three years.
  4. Mei Ling took the WSQ course in August 2024, so she is due by August 2027; set a reminder for May 2027.
  5. Ravi drives the 7-tonne forklift, so he also needs the Heavy Forklift Course, and he cannot find his WSQ certificate. MOM's lost-licence answer says to ask the training provider for a replacement, and recommends re-attending the WSQ course if it was lost after more than two years of operating.

The result: three people need the enhanced course before the year ends, one needs a certificate search now, and one goes on next year's plan. If the company cannot release three drivers at once, it can stagger them, but after 1 January it should not authorise an overdue driver to operate a forklift.

A warehouse supervisor with a clipboard talks with a forklift operator beside a parked forklift in a storage aisle
Conceptual illustration: a supervisor checking a forklift operator's training dates in a warehouse aisle; it does not show a real company, course or training provider. Illustration by Olano editorial, made with AI assistance.

How do you choose a refresher provider?

MOM's June 2026 list names 16 providers certified for the Forklift Operator Refresher Training Course: AA International Consultancy, AAT Training Hub, Absolute Kinetics Consultancy, August International, BS Technology, EFG Training Services, Eversafe Academy, EuroSAFE Associates, Galmon (S), NTUC Learning Hub, Pioneer Training Centre, SATS, THT Academy, UBTS Academy, UMW Equipment and Engineering, and Wong Fong Academy.

Language matters for many crews. On the same list, AAT Training Hub is certified to run the refresher in English, Malay, Mandarin and Tamil, and Absolute Kinetics and Wong Fong Academy in English, Mandarin and Tamil; the others are listed for English only. MOM's FAQ points to SWDA's OurWorkforce course directory for classes; we could not open it, so check fees, dates and any funding with the provider. Our guide to choosing a staff-training provider has questions worth asking before you pay.

An employer checklist before the year ends

  1. List everyone who drives a forklift on your premises, including part-timers, agency workers and contractors; the circular makes principals and occupiers responsible too.
  2. For each person, record the course name, provider, certificate number and completion date of the WSQ course and the latest refresher.
  3. Sort them by due date as in the example above, and book the overdue operators first.
  4. Ask the provider to confirm in writing that the booking is the enhanced Forklift Operator Refresher Training Course.
  5. Do not authorise an operator whose refresher is overdue to drive a forklift after 1 January 2027.
  6. File the new certificates with your staff records and set a reminder three months before each person's next three-year date; our guides on how long to keep business records and writing a standard operating procedure help here.

For other year-end safety duties, see our operations guides, the heat stress rules from 1 December 2026 and checking that WICA covers every employee.

Common questions

How often must a forklift operator attend a refresher course in Singapore?

At least once every three years after the WSQ Operate Forklift Course and after each refresher, a requirement MOM says applies from 1 January 2027.

Does MOM issue a forklift licence?

No; MOM says it does not issue forklift licences, and the certificate from the WSQ Operate Forklift Course is the proof of competence for forklifts below 5 tonnes.

How long is the enhanced forklift refresher course?

Twelve hours: 4 hours of e-learning with an assessment, 4 hours of case-study discussion and 4 hours of hands-on practice with an assessment.

Are employers responsible for contract or agency forklift drivers?

MOM's circular says occupiers, employers and principals must ensure operators have completed the refresher before authorising them to operate forklifts.

Sources

Something changed or worth adding?

Send a correction or suggestion